Reversible Panels
REVERSIBLE PANELS
& How to Change Them
Same Price; Twice the Life!
Our A-Look™ and C-Look™ reversible panels provide long lasting benefits to our customers.
If your panel becomes damaged you can simply remove and flip the panel reducing any worry in the event that a manufacturer stops produding that specific laminate.
Learn how to change our reversible panels below!
Reversing Our A-Look™ Panel
Step 1:
Remove the top cap.
Remove the top cap.
Step 2:
Remove the panels above the damaged panel.
Remove the panels above the damaged panel.
Step 3:
Remove the damaged panel
Remove the damaged panel
Step 4:
Remove the interlock extrusion from the damaged panel. Just pull it out.
Remove the interlock extrusion from the damaged panel. Just pull it out.
Step 5:
Flip the damaged panel.
Flip the damaged panel.
Step 6:
Re-insert the interlock extrusion so the undamaged face is out.
Re-insert the interlock extrusion so the undamaged face is out.
Step 7:
Reinstall the removed panels in reverse order.
Reinstall the removed panels in reverse order.
Step 8:
Reinstall the top cap.
Reinstall the top cap.
Reversing Our C-Look™ Panel
Step 1:
Remove the black screw cap inlay
Remove the black screw cap inlay
Step 2:
Remove the main C-Look™ extrusion and loosen the screws in the alternate extrusion that houses the panel
Remove the main C-Look™ extrusion and loosen the screws in the alternate extrusion that houses the panel
Step 3:
Slide out the target damaged panel
Slide out the target damaged panel
Step 4:
Flip the panel 180° and slide it back into the extrusion
Flip the panel 180° and slide it back into the extrusion
Step 5:
Re-apply the C-Look™ extrusion and tighten the screws
Re-apply the C-Look™ extrusion and tighten the screws
Step 6:
Re-apply the screw cap inlay
Re-apply the screw cap inlay
